SNA NRJE Node Managers Guide (30292-90007)

Appendix A 181
Result Codes and Messages
SNA NRJE Error Messages
517 MESSAGE: UNABLE TO OPEN “TO MONITOR” MESSAGE FILE.
(MON=517)
CAUSE: The message file between the command interpreter and the
workstation monitor failed to open.
ACTION: Attempt to start the workstation again. If the problem
continues, contact your HP representative for assistance.
518 MESSAGE: UNABLE TO SET TIMED READ ON “TO MONITOR” FILE.
(SEV=518)
CAUSE:
ACTION:
519 MESSAGE: UNABLE TO FIND THE WORKSTATION, !, IN THE NRJE
XDS. (MON=519)
CAUSE: The NRJE monitor (NRJEMON) is being run without
preparation. ! is the workstation name.
ACTION: Issue a STARTWS command or call NRJESTARTWS intrinsic
before running the monitor.
520 MESSAGE: UNABLE TO START THE LU CLASS: !. (MON=520)
CAUSE: The workstation monitor could not start the LU.
ACTION: See subsequent messages that appear for an explanation.
521 MESSAGE: FILE SYSTEM ERROR: ! (MON=521)
CAUSE: File system error has occurred.
ACTION: Determine the cause of the file system error.
522 MESSAGE: UNABLE TO OPEN “FROM MONITOR” MESSAGE FILE.
(SEV=522)
CAUSE:
ACTION:
523 MESSAGE: UNABLE TO CREATE A PROCESS FOR LU: !. (MON=523)
CAUSE:
ACTION: Ensure that the NRJELU program exists under NRJE.SYS.
524 MESSAGE: NO LU SPECIFIED FOR INITIATION. (MON=524)
CAUSE: Neither the START command nor the NRJE configuration
specified any LUs to be initiated.
ACTION: Issue a START command with the LU parameter, and/or revise
the NRJE configuration.