SNA NRJE Node Managers Guide (30292-90007)

Appendix A 143
Result Codes and Messages
SNA NRJE Error Messages
ACTION: Resubmit with an input priority within the bounds of 0 and 14.
71 MESSAGE: UNABLE TO CLOSE READER. (SUB=71)
CAUSE: File system related error. A file system error message will
appear after this message.
ACTION: Determine the cause by inspecting the file system error
message and correct the problem.
72 MESSAGE: SUBMISSION CODE OF FILE #! IS NOT BETWEEN 0 AND
2. (SUB=72)
CAUSE: ! is the file number in the order of input to NRJESubmit
intrinsic or SUBMIT command.
ACTION: Correct the problem and re-execute.
73 MESSAGE: UNABLE TO OBTAIN SPOOL FILE NUMBER FOR THE
JOB. (SEV=73)
CAUSE: File system related error. A file system error message will
appear after this message.
ACTION: Determine the cause by inspecting the file system error
message and correct the problem.
74 MESSAGE: INVALID DIRECT OPTION FOR FILE #!. (SUB=74)
CAUSE: ! is the file number in the order of input to NRJESubmit
intrinsic or SUBMIT command.
ACTION: Correct the problem and re-execute.
75 MESSAGE: UNABLE TO WRITE CONTROL PARAMETERS TO SPOOL
FILE. (SEV=75)
CAUSE: File system related error. A file system error message will
appear after this message.
ACTION: Determine the cause by inspecting the file system error
message and correct the problem.
76 MESSAGE: INVALID JOB NAME. (SUB=76)
CAUSE: The job naming convention has been violated.
ACTION: Make sure that the job name begins with a letter and is eight
or fewer alphanumeric characters long.
77 MESSAGE: CONFIGURATION ERROR. UNABLE TO OBTAIN RU SIZE.
(SUB=77)
CAUSE: Configuration error.
ACTION: Check the configuration file for correctness. If the problem still
occurs contact Hewlett-Packard for assistance.