SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 127
Commands
WELCOME
Example
:NRJE RMT11 Enter the NRJE subsystem command interpreter
using RMT11 as the default workstation.
ProductNum VersionNum NRJE (C) HEWLETT-PACKARD CO. CopyrightYear
NRJE displays its banner line.
WELCOME MESSAGE TO BE REVISED The welcome message is displayed.
RMT11> ...
The NRJE subsystem command interpreter
issues you a prompt.
RMT11>WELCOME [RETURN] Begin WELCOME command sequence.
1>WELCOME TO NRJE. [RETURN] You are prompted with an nn> to begin each
2>RMT11 READER IS DOWN. [RETURN] line of the welcome message.
3>HOST IS DOWN FOR GEN. [RETURN]
4>SPOOL FILES 75% FILLED. [RETURN]
5>[RETURN] or EOW for a job stream. The welcome message is terminated when
you enter a [RETURN] with no data, or
EOW [RETURN] in response to an nn> prompt.
Text Reference
NRJEUpdWel is the manager intrinsic counterpart of this command; it is
described in the SNA NRJE User/Programmer Reference Manual. Also
see NRJEWelcome, which provides the text of the current welcome
message, in that manual.