SNA NRJE Node Managers Guide (30292-90007)

Chapter 6 109
Commands
RDRDOWN
RDRDOWN
Disables the reader of an NRJE workstation.
Syntax
RDRD[OWN] [ Wsid ]
Parameter
Wsid The workstation name. This can be up to eight
alphanumeric characters long; the first character must
be alphabetic.
If you omit this parameter, the default workstation
identifier is used. You can specify a default workstation
identifier in the NRJE command.
Description
This command disables the reader of an NRJE workstation. When
RDRDOWN is executed successfully, NRJE users are prevented from
submitting jobs. Some reasons for inhibiting use of the reader of an
NRJE workstation are as follows:
• The configured spooled disk space on the HP 3000 has been used up.
• The host has been down for a long time, and many jobs are being
submitted.
This command has the same effect as the MPE console command SHUTQ
ldev , where ldev is the logical device number of the NRJE workstation
reader.
You can specify a particular workstation by specifying a Wsid .
Text Reference
NRJERdrAccess is the manager intrinsic counterpart of this command;
it is described in the SNA NRJE User/Programmer Reference Manual.
Also see SHUTQ in that manual.