SNA Link/iX Node Managers Guide (30291-90507)

Chapter 3 99
Logging Configuration
Configuring Logging
Enabling Users for a Specific Subsystem and Class
If you want the logging events for only a specific logging subsystem
and class to be displayed at the list devices of users, you can do it
through the screen shown in Figure 3-6, “Class Data Screen.” You can
go directly to this screen from any screen by typing
@LOGGING.
subsystemname.classname in the command window and
pressing
[ENTER].
Figure 3-6 Class Data Screen
Fields Path:
For display only. The NMMGR path to this screen. It
includes the names of the subsystem and the logging
class you are enabling users for.
Enable Console Logging?
Required. Enter Y if you want logging events for
only
this subsystem and class
displayed at the HP e3000
console; N, otherwise.
Refer to Table 3-1 for guidelines.
Note that if the value you enter here is different from
the value specified for this subsystem and class on the
screen shown in Figure 3-3, “IBM Logging
Configuration (1) Screen,” Figure 3-4, “IBM Logging
Configuration (2) Screen,” or Figure 3-5, “IBM Logging