SNA Link/iX Node Managers Guide (30291-90507)

96 Chapter3

Logging Conﬁguration

Conﬁguring Logging

IBM Logging Conﬁguration (3)

On this screen, as shown in Figure 3-5, “IBM Logging Conﬁguration (3)

Screen,” you specify logging information for these subsystems; SNADS

and Token Ring Link.

NOTE

Although the logging subsystem for RJE/BSC Link (SUB0037) is shown

on the “IBM Logging Conﬁguration (3)” screen, information for

conﬁguring RJE/BSC Link logging is not included in this manual. See

the RJE/XL Node Manager’s Guide for that information.

If you want to specify logging information for an SNA subsystem not

shown on these screens, press

[f8] (Prior Screen) until you are placed

at either Figure 3-4, “IBM Logging Conﬁguration (2) Screen,” or Figure

3-3, “IBM Logging Conﬁguration (1) Screen.” Each of these screens is

described earlier in this chapter.

Figure 3-5 IBM Logging Conﬁguration (3) Screen

Fields Subsystem

For display only. The names and numbers of the

subsystems you can conﬁgure logging for on this screen.

Class Name

For display only. The names of the logging classes

you can conﬁgure logging for on this screen.