SNA Link/iX Node Managers Guide (30291-90507)

Chapter 2 61
SNA Node and Link Configuration
Configuring the SNA Node and Link
SDLCMUX Link Data Screen
Once you have specified the PU and LU information, you are ready to
configure the communications link parameters for the SDLCMUX link.
Select this screen by pressing
[f1] (Go To LINKDATA) as shown in Figure
2-4, “PU Data Screen.” You get the screen shown in Figure 2-6,
“SDLCMUX Link Data Screen.”
Figure 2-6 SDLCMUX Link Data Screen
Fields Path
Required. The Path field is the current physical path
for the adapter card as specified in the NMCONFIG
configuration file.
Note: On PCI SDLCMUX links, the physical path
generally has more components and is a “longer” path
(e.g., 0/6/0/1.2, which includes the port number 2) along
with the port number associated with that link. The
output for PCI links is different from HP-PB.
Modem type
Required. V.25bis is a ITU-T specification for a modem
command language and overall modem behavior. It
includes both asynchronous and synchronous command
interfaces.
Hayes is the dialing standard for asynchronous
modems. Hayes includes V.25bis in its ULTRA modems