SNA Link/iX Node Managers Guide (30291-90507)

Chapter 2 53
SNA Node and Link Configuration
Configuring the SNA Node and Link
PU Data Screen
After you have selected a node, NMMGR displays Figure 2-4, “PU Data
Screen.” (You can go directly to this screen from any screen by typing
@SNANODE.
nodename in the command window and pressing [ENTER].)
Here you enter information that identifies the PU to the host. If you are
configuring a new node, you must enter all of the information.
Figure 2-4 PU Data Screen
Fields Path
For display only. The NMMGR path to this screen. It
includes the name of the SNA node you are configuring.
Link Type
Required. The type of communications link the node is
being configured for.
Values: SDLC, X.25, TOKEN, or SDLCMUX.
Default: SDLC
Node Type
Required. The type of node being configured. If you
are configuring a T2.0 node, enter 2.0. If you are
configuring a T2.1 node, enter 2.1.
If you are configuring a node for SNA/X.25 Link, you
must enter 2.0 in this field.