SNA Link/iX Node Managers Guide (30291-90507)

Chapter 2 49
SNA Node and Link Configuration
Configuring the SNA Node and Link
Configuring the SNA Node and Link
Once you have opened the configuration file, you are placed at the
NMMGR “Main” screen.
Main Screen
From the “Main” screen shown in Figure 2-1, you can select the
category of network subsystems you want to configure.
Figure 2-1 Main Screen
To access the NMMGR branch for configuring an SNA node and link,
press
[f4] (IBM). This places you at Figure 2-2, “HP-IBM Configuration
Screen.”.