SNA Link/iX Node Managers Guide (30291-90507)

36 Chapter2
SNA Node and Link Configuration
Data Required from the Host Configuration
Note that once the facility set to be used by SNA/X.25 Link is specified
in the INDEX operand of the X25.OUFT host macro, it must also be
referenced by the OUFINDX operand of the X25.LINE host macro.
Table 2-5 shows the relationship between items from the host
configuration and items in the DTC Manager configuration. The
HP SNA Products Remote System Configuration Guide explains the
host configuration. See the appropriate DTC documentation for more
information about the DTC Manager configuration through OpenView.
NOTE Although it is not an X.25 standard requirement, we recommend that
the value specified in the Window Size field
match the VWINDOW
operand of the X25.VCCPT host macro.
Table 2-6 shows the relationship between items from the host
configuration and items in the DTS configuration (for NS host-based
network management). The HP SNA Products Remote System
Configuration Guide explains the host configuration. See the
appropriate NS host-based network management documentation for
more information about the DTS configuration through OpenView.
Table 2-4 Host Macro Values for X.25 System Access
Host Configuration Macro Field in NMMGR Screen Network Services
NMMGR Screen
X25.OUFT INDEX Set Name X.25 User Facility Sets
Table 2-5 Host Macro Values for DTC Manager (X.25)
Host Configuration
Macro and Operand
Field in OpenView Screen DTC Manager
OpenView Screen
X25.VCCPT VWINDOW Window Size X.25 Level 3
Table 2-6 Host Macro Values for DTS Configuration (X.25)
Host Configuration
Macro and Operand
Field in NMMGR Screen DTS NMMGR Screen
X25.VCCPT VWINDOW Window Size DTC X.25 Card Configuration
— Level 3 & Miscellaneous