SNA Link/iX Node Managers Guide (30291-90507)

232 AppendixA
Messages
SNA Transport Logging Messages
MESSAGE: Node NodeName shut down completed
CAUSE: Node shutdown has completed successfully. The indicated node
is no longer active.
ACTION: None; this is a normal event.
MESSAGE: Node shutdown in progress
CAUSE: SNA Transport is discarding a Path Information Unit (PIU)
received during the node shutdown.
ACTION: None; this is a normal event.
MESSAGE: Open user granted on node
NodeName
CAUSE: A request to open an LU user has been granted.
ACTION: None; this is a normal event.
MESSAGE: Pacing req not allowed in current state
CAUSE: The remote system has sent consecutive pacing requests, with
no response to the initial request.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: PACKET DISCARDED ON NODE
NodeName BY MODULE
ModuleNum
CAUSE: A shutdown is occurring, and the module is cleaning up before
termination.
ACTION: None; this is a normal event.
CAUSE: An error has been detected by SNA Transport and the
erroneous packet has been discarded. The error code and diagnostic
message indicate the reason for the discard.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: PACKET REJECTED ON NODE
NodeName BY MODULE
ModuleNum
CAUSE: An error was detected in the received request. So, a negative
response (a packet reject) is sent by SNA Transport.
ACTION: Call your Hewlett-Packard support contact.
CAUSE: The node is shutting down.
ACTION: None; this is a normal event.
CAUSE: The remote system is configured to send a welcome screen
immediately after receiving the ACTivate Logical Unit (ACTLU)
response. When this is the case, the welcome screen is rejected with
sense 1003.
ACTION: None; this is a normal event. The welcome screen is
retransmitted by the remote system when the LU-LU session is