SNA Link/iX Node Managers Guide (30291-90507)

Appendix A 229
Messages
SNA Transport Logging Messages
MESSAGE: Host beginning activation of node NodeName
CAUSE: SNA Transport received the ACTivate Physical Unit (ACTPU)
request for the indicated node.
ACTION: None; this is a normal event.
MESSAGE: HP IS PRIMARY LU
LUName
CAUSE: This is part of the OpenUser/CloseUser logging messages. It
indicates that the user is a primary LU, capable of issuing a BIND
request.
ACTION: None; this is a normal event.
MESSAGE: HP IS SECONDARY LU LUName
CAUSE: This is part of the OpenUser/CloseUser logging messages. It
indicates that the user is a secondary LU, capable of only receiving a
BIND request.
ACTION: None; this is a normal event.
MESSAGE: INTERNAL ERROR ErrorNum IN NODE NodeName
CAUSE: The indicated SNA node has recognized a critical error. This
event is serious and causes the node to shut down.
ACTION: Call your Hewlett-Packard support contact, and please report
the
ErrorNum .
MESSAGE: IPR received correctly
CAUSE: SNA Transport received and processed the Isolated Pacing
Response (IPR) and is discarding it when finished.
ACTION: None; this is a normal event.
MESSAGE: Link activated for node
NodeName
CAUSE: Link activation has completed successfully.
ACTION: None; this is a normal event.
MESSAGE: Link connect failure on node
NodeName
CAUSE: SNA Transport was unable to connect with the WAN module
configurator.
ACTION: Call your Hewlett-Packard support contact.
MESSAGE: Link disconnect failure on node
NodeName
CAUSE: SNA Transport received a bad response to a link disconnect
request.
ACTION: Call your Hewlett-Packard support contact.