SNA Link/iX Node Managers Guide (30291-90507)

Appendix A 223
Messages
SNA Transport Error Messages
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 28 MESSAGE: Invalid function code. (SNAERR 28)
CAUSE: An SNA service passed a bad function code to the SNAControl
or SNASessinfo intrinsic.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 29 MESSAGE: Inactive node or invalid node name. (SNAERR 29)
CAUSE: An invalid node name was specified in a call to the
SNAOpenUser intrinsic.
ACTION: Ensure that the specified node is a valid SNA node that is
currently active.
SNAERR 30 MESSAGE: Illegal call. (SNAERR 30) An attempt was made to access
an LU-SSCP session in an LU-LU session.
CAUSE: A call to the SNASendtoSSCP or SNARcvfromSSCP intrinsic was
made on an LU-LU session.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 31 MESSAGE: Invalid error code. (SNAERR 31)
CAUSE: An invalid error code was passed to the SNAErrmsg intrinsic.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 32 MESSAGE: Privilege mode required. (SNAERR 32)
CAUSE: An attempt to call an SNA Transport intrinsic was made while
in user mode.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 33 MESSAGE: Invalid InfoWanted parameter. (SNAERR 33)
CAUSE: An invalid
InfoWanted parameter was specified in a call to the
SNASessinfo intrinsic.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.
SNAERR 35 MESSAGE: No request pending. (SNAERR 35)
CAUSE: An attempt to abort an SNARcv, SNARcvFromSSCP, or
SNASendtoSSCP intrinsic was made when no such request was
outstanding.
ACTION: Write down the circumstances and call your Hewlett-Packard
support contact.