SNA Link/iX Node Managers Guide (30291-90507)

Chapter 6 155
MPE Commands
SNACONTROL STATUS
Receive overruns is the total number of received frames that contained
no control bytes.
CRC errors is the total number of received frames that contained a
Cyclical Redundancy Check (CRC) error.
Statistics resets is the total number of times the statistics have been
cleared.
X.25 Link-Level Status Information
Two examples of X.25 link-level status displays are given below, and the
terminology used is described after the examples. Note that when
link-level status information is displayed, the corresponding
session-level status information is also displayed. (Since the
session-level status terminology is described later under “Session-Level
Status Information,” it is not described here.)
Example 1 If an X.25 link is being used, typing
SNACONTROL STATUS;NODE=IBMNODE;LINK=ALL