SNA Link/iX Node Managers Guide (30291-90009)

Chapter 3 85
Logging Configuration
Configuring Logging
Figure 3-3 IBM Logging Configuration (1) Screen Example
Fields
Subsystem
For display only. The names and numbers of the
subsystems you can configure logging for on this screen.
Class Name
For display only. The names of the logging classes
you can configure logging for on this screen.
Console Logging
Required. Enter Y if you want logging events for a
class displayed at the HP 3000 console; N, otherwise.
Refer to Table 3-1 for guidelines.
Default: Each class's default is the recommended
setting for that class (see Table 3-1).
NOTE If you change the console logging configuration for any subsystem, the
changes will not take effect until the
entire HP 3000 system is shut
down and restarted.