SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts

Appendix A 261
Messages
LAN Error Messages
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
69 MESSAGE: The NIO LAN/console card reports that CCMD_IN was
sent to an outbound only register set.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
70 MESSAGE: The NIO LAN/console card detects unknown CCMD.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
71 MESSAGE: The NIO LAN/console card detects fatal backplane error.
CAUSE: Unknown. Need more information.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
72 MESSAGE: The NIO LAN/console card detects fatal bus error.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
73 MESSAGE: The NIO LAN/console card detects fatal error, dinmode.
CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
74 MESSAGE: The NIO LAN/console card detects parity error.
CAUSE: The problem is caused by bad NIO LAN/console hardware.
ACTION: Your Hewlett-Packard representative must run diagnostics on
the LAN/console card.
75 MESSAGE: The NIO LAN/console card detects assertion of the
BUS_ERROR signal.
CAUSE: Unknown. Need more information.
ACTION: Write down the error information displayed on the console and
call your Hewlett-Packard support contact.
76 MESSAGE: The NIO LAN/console card detects a severe hardware
error.
CAUSE: Unknown. Need more information.