SNA Link/iX Node Managers Guide (30291-90009)
Table Of Contents
- 1 SNA Links Overview
- 2 SNA Node and Link Configuration
- 3 Logging Configuration
- 4 SNA Node Startup and Shutdown
- 5 SNA Link Troubleshooting
- 6 MPE Commands
- 7 SNA Link Installation Information
- A Messages
- SDLC Link Startup Error Messages
- SDLC Link Driver Error Messages
- SNACONTROL Error Messages
- SNA Transport Error Messages
- SNA Transport Logging Messages
- SDLC Link Shutdown Error Messages
- X.25 Link Failure Error Codes
- X.25 Link Module Configurator Error Codes
- X.25 Link QLLC Internal Error Codes
- NetView Alerts Error Messages
- Network Dump Manager Error Messages
- LAN Error Messages
- B Netview Alerts
Appendix A 241
Messages
X.25 Link Module Configurator Error Codes
ACTION: Call your Hewlett-Packard support contact.
-506 MESSAGE: UNABLE TO SEND TRACE DISABLE REQUEST
CAUSE: The module configurator encountered an error while trying to
send the trace disable request message.
ACTION: Call your Hewlett-Packard support contact.
-507 MESSAGE: UNABLE TO GET MESSAGE FRAME FOR TRACE
DISABLE REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the trace disable request message.
ACTION: Call your Hewlett-Packard support contact.
-508 MESSAGE: UNABLE TO GET MESSAGE FRAME FOR STATUS
REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the status request message.
ACTION: Call your Hewlett-Packard support contact.
-509 MESSAGE: UNABLE TO SEND STATUS REQUEST
CAUSE: The module configurator encountered an error while trying to
send the status request message.
ACTION: Call your Hewlett-Packard support contact.
-510 MESSAGE: UNABLE TO RECEIVE STATUS COMPLETION MESSAGE
CAUSE: The module configurator encountered an error while trying to
receive the status completion message.
ACTION: Call your Hewlett-Packard support contact.