SNA Link/iX Node Managers Guide (30291-90009)

240 AppendixA
Messages
X.25 Link Module Configurator Error Codes
-204 MESSAGE: STATUS BUFFER INVALID
CAUSE: The Qualified Logical Link Control (QLLC) module returned an
invalid buffer containing the link status information. Note that the
node can still function, but link status information cannot be retrieved.
ACTION: Call your Hewlett-Packard support contact.
-205 MESSAGE: STATUS REPLY INVALID
CAUSE: The module configurator status routine received an invalid
status reply. Note that the node can still function, but link status
information cannot be retrieved.
ACTION: Call your Hewlett-Packard support contact.
-500 MESSAGE: UNABLE TO RECEIVE OPENLINK COMPLETION
MESSAGE
CAUSE: The module configurator encountered an error while trying to
receive the OpenLink completion message.
ACTION: Call your Hewlett-Packard support contact.
-501 MESSAGE: UNABLE TO GET MSG FRAME FOR CLOSELINK
REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the CloseLink request message.
ACTION: Call your Hewlett-Packard support contact.
-502 MESSAGE: UNABLE TO SEND CLOSELINK REQUEST
CAUSE: The module configurator encountered an error while trying to
send the CloseLink request message.
ACTION: Call your Hewlett-Packard support contact.
-503 MESSAGE: UNABLE TO RECEIVE CLOSELINK COMPLETION
MESSAGE
CAUSE: The module configurator encountered an error while trying to
receive the CloseLink completion message.
ACTION: Call your Hewlett-Packard support contact.
-504 MESSAGE: UNABLE TO GET MSG FRAME FOR TRACE ENABLE
REQUEST
CAUSE: The module configurator encountered an error while trying to
allocate the trace enable request message.
ACTION: Call your Hewlett-Packard support contact.
-505 MESSAGE: UNABLE TO SEND TRACE ENABLE REQUEST
CAUSE: The module configurator encountered an error while trying to
send the trace enable request message.