SNA Link/iX Node Managers Guide (30291-90009)

Appendix A 237
Messages
X.25 Link Failure Error Codes
-74 MESSAGE: DATACOM LINE LOST
CAUSE: The virtual circuit has terminated. That is, it has been cleared,
reset, or restarted.
ACTION: Since this is a recoverable link error, restart the SNA node. If
the error still occurs, call your Hewlett-Packard support contact.
-76 MESSAGE: DISCONNECT TIMER POPPED
CAUSE: The X.25 link has timed out while waiting for a solicited Q
disconnect (QDC) from the remote system. The disconnect timer
normally is running when the link is in the process of shutting down.
Since the link is terminated when the timer pops, the desired result
(shutting down the link) is achieved.
ACTION: Note that the solicited QDC was never received. No other
action is necessary.
-77 MESSAGE: INACTIVITY TIMER POPPED
CAUSE: The time interval specified for Inactivity Timeout has
elapsed since any packets were sent or received.
ACTION: Use NMMGR or the configuration file critical summary to
ensure that the interval specified for Inactivity Timeout is correct. If
the timeout occurs before a transaction is completed, try increasing the
value of Inactivity Timeout. If the error still occurs, call your
Hewlett-Packard support contact.
-78 MESSAGE: CONNECT TIMER POPPED
CAUSE: The X.25 link has timed out waiting for a QSM from the remote
system.
ACTION: Restart the SNA node. If the problem still occurs, call your
Hewlett-Packard support contact.
-79 MESSAGE: ALREADY CONNECTED
CAUSE: SNA Transport has requested an SNA connection for an X.25
link that is already connected.
ACTION: Call your Hewlett-Packard support contact.
-80 MESSAGE: DISCONNECT IN PROGRESS
CAUSE: SNA Transport has requested an SNA connection or
disconnection while a QDC is pending from the remote system.
ACTION: Call your Hewlett-Packard support contact.
-81 MESSAGE: CONNECT IN PROGRESS
CAUSE: SNA Transport has requested an SNA connection or
disconnection while the QSM from the remote system is pending.
ACTION: Call your Hewlett-Packard support contact.