Read Before Installing MPE/iX Release 7.0 Express 1 (30216-90327)

Chapter 2

Modem Connections on A- and N-Class

Current remote/modem port access: GSP

GSP Host Name: <systemname>

GSP>

=====================================

This should be all that is needed to enable the remote console modem port.

If you are using a terminal emulator on a PC such as WRQ Reflections, then go to the connection menu and

select 'disconnect'. If the system is booted and at the CI prompt, do the following:

:pause 10

+++

ath0

This will cause the local modem to drop the connection and leave the local console in the proper

state. The “pause” command is entered so the modem escape string (+++) is not echoed to the

remote modem. If the escape string is echoed back to the remote modem, then the modem connected

to the system also goes ofﬂine and prevents the user from disconnecting the local modem. If needed

you can reset the modem from the GSP on the local or LAN console port with the GSP command

“MR” for modem reset