NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 6 97
Using NETTOOL
Using the NETTOOL Tools
interpretation of resource usage and pointing to
possible relationships with configurable parameters.
Non-verbose mode displays current, maximum
experienced (high-water mark), and maximum
allowable usage for the resources specified. Default is
non-verbose.
item Use to select a particular item from the one-line display
so that you can obtain detailed information on that
item.
refresh Use to set the number of times the program will display
resource usage before returning control to you. Default
is one cycle. Selecting
[CONTROL]-Y will also return
control.
type Use to select which resource types the program will
display in the one-line (non-verbose) mode. Default is to
display all resource types.
used Use to suppress display of entries that are currently
unused. Default is to display resources regardless of
usage.
delay Use to select the interval (in seconds) between displays
of resource usage. Use this option in conjunction with
refresh in order to monitor the activity of resource
usage. Default is a delay of 1 second.
SOCKINFO
The SOCKINFO tool displays sockets information.
1. Run NETTOOL by entering the program name at the MPE prompt:
NETTOOL.NET.SYS
The root menu will appear.
2. Select the SOCKINFO tool from the main menu by entering the
following SOCKINFO syntax:
SOCKINFO [filter][,pin]
filter program name in the form: file.group.account;or
user name in the form: user.account.
pin display for the specified PIN instead of starting out
in Global Display.