NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 7 175
Commands
SWITCHNMLOG
Discussion
SWITCHNMLOG closes the current NMLG file and creates and opens a
new one. When you enter SWITCHNMLOG, NMS displays the message:
NMLG FILE NUMBER nnnn IS mm% FULL
NMLG FILE NUMBER pppp ON
where nnnn is the previous NMLG FILE number, mm is the percentage
of file space used, and
pppp is the newly opened file numbered one more
than the last file number.
If network logging is disabled due to an irrecoverable error when
SWITCHNMLOG is entered, NMS displays the following message
explaining the cause. The system will need to be brought back up with a
warm or cool start.
NMLG FILE NUMBER nnnn ERROR #nn . NM LOGGING STOPPED. (NMCNERR 36)
If network logging is enabled but currently suspended due to a
recoverable error, NMS displays the following message explaining the
cause. When the problem is corrected, the manager can issue the
RESUMENMLOG command.
NMLG FILE NUMBER nnnn ERROR #nn . NM LOGGING SUSPENDED. (NMCNERR 38)