NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 7 167
Commands
NSCONTROL STOP
NSCONTROL STOP
Terminates Network Services subsystem.
Syntax
NSCONTROL STOP[= service [, service ]…]
Parameters
STOP= services
Terminates the Network Services subsystem. STOP
executes a “graceful” shutdown of Network Services.
Existing users of the service can continue until they
complete their NS activity, but new users are prevented
from using the services. The optional service list
(services) allows you to select which of the services are
disabled for local or remote use. When all Network
Services are stopped, the DSDAD process will terminate.
Default (if the service list is omitted): terminates all
services for both local and remote use.
The services list is the same as for the START function,
except that the specified services are stopped, not
started.
Specifying the following services prevents users on
remote nodes from using resources on the local node:
LOOPBACK Prevents remote users from using the
loopback diagnostic server on the local
node.
NFT Prevents remote users from
transferring files to or from the local
node using the DSCOPY command and
intrinsic.
NSSTAT Prevents remote users from using the
NSSTATUS intrinsic to retrieve network
services information from the local
node.
RFA Prevents remote users from accessing
files on the local node.
RPM Prevents remote users from creating
and killing processes on the local node
using the Remote Process Management