NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 7 143
Commands
NETCONTROL VERSION
NETCONTROL VERSION
Displays the version numbers for the network transport software
modules.
Syntax
NETCONTROL VERSION[=MOD]
Parameters
VERSION[=MOD] Displays the overall version of the
network transport. If qualified with the
MOD keyword, displays the version of
each of the software modules of the
network transport and the overall
version.
Discussion
The VERSION function of the NETCONTROL command allows you to check
the version numbers of the network transport modules to ensure that
they are compatible and up-to-date, or simply to confirm which version
is installed on your system. Unlike most other NETCONTROL commands,
transport does not need to be started to use this command.
Output from this command is the same as that produced by the
NMMAINT.PUB.SYS utility.
Example 1
Example 1 shows how to display the overall version number of the
network transport.
:NETCONTROL VERSION
NS3000/iX Transport 32098-20033 overall version = B.05.07