NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

Chapter 7 125

Commands

NETCONTROL START

Example 6

Starting the LAN NI, conﬁgured as LAN1, when the general protocols

are already active, gives you the following:

:NETCONTROL START;NET=LAN1

** NETXPORT Map Tbl; Mapping Table Created

- Loc: 1; Class: 4; Parm= $D5C80250; Pin: 0

** NETXPORT LAN NI; Network interface start

- Loc: 28; Class: 4; Parm= $96430000; PortID: $FFFFFE81

** NETXPORT IP; Protocol start

- Loc: 102; Class: 4; Parm= $D5CD0000; PortID: $FFFFFE88

** NETXPORT Probe; Protocol start

- Loc: 35; Class: 4; Parm= $00000000; PortID: $FFFFDFF3

** NETXPORT ARP; Protocol start

- Loc: 3; Class: 4; Parm= $00000000; PortID: $FFFFDFF5

Notice that only the LAN NI and its associated protocols are started.

Compare the displayed events to the deﬁned entities of Figure 7-1. The

events displayed show creation of the LAN NI entity.