NS3000/iX Operations and Maintenance Reference Manual (36922-90042)

ManualsBrandsHP ManualsSoftwareMPE/iX 7.5 Operating System

111

112

113

114

115

116

117

118

119

120

Chapter 7 113

Commands

NETCONTROL

Command used to initialize, terminate, and control the operation of the

network transport.

Syntax

{

function

}[;

function

]

NETCONTROL {

entity

}[;

entity

]

Use

Available In Session? YES

In Job? YES

In Break? NO

Programmatically? YES

Breakable? NO

Capabilities? NM

Parameters

function

Only one of each type of function is recommended on a

command line. Refer to function descriptions on the

following pages. The functions are:

ADDLINK TRACEOFF

DELLINK TRACEON

START UPDATE

STATUS VERSION

STOP

Only one of each type of function (START, TRACE, etc.)

is recommended on a command line. For example, the

command:

:NETCONTROL

TRACEON=HDM;START;TRACEON=HD;NET=LAN1

is not recommended because TRACEON appears twice

and also appears with START.

entity

One or more of the entities deﬁned for NETCONTROL. The

keywords for these entities are shown in Figure 7-1.

NET Speciﬁes a group entity that consists of a network

interface which is not a gateway half, and all the

protocol modules that are conﬁgured for that network