NS3000/iX NMMGR Screens Reference Manual - Edition 9 (36922-90040)

22 Chapter1
Overview
Software Configuration Maximums
Software Configuration Maximums
The following are the software maximums in Table 1-1 that must be
adhered to when configuring a supported link. These maximums may
be further limited by the system hardware (number of available slots).
Maximums are also documented throughout the manual for the
appropriate screen.
Table 1-1 Configuration Maximums
Screen
Number/Description
Path Maximum Limit
#9 Network Directory
Select Node Name
None
File Size Limit
a
#85 Link Selection LINK 256/system
#112 Network Interface
Configuration
NETXPORT.NI
12 NI/system
b
#115 Point-to-Point
Mapping Configuration
NETXPORT.NI.NIname.MAPPING 1024
Mappings/Router
#117 Gateway Half NI
Links
NETXPORT.NI.NIname.LINK 1 link/Gateway
Half NI
#119 Point-to-Point NI
Links
NETXPORT.NI.NIname. 40 links/Router NI
#151 X.25 Network
Interface Links
NETXPORT.NI.NIname.LINK 12 links/X.25 NI
#152 Neighbor
Gateways
NETXPORT.NI.NIname.INTERNET 255 gateways/NI
#158 Neighbor Gateway
Reachable Networks
NETXPORT.NI.NIname.INTERNET.gatewayn
2550 nets/NI
c
#162 X.25 SVC Address
Key Paths
NETXPORT.NIname.PROTOCOL.X25.SVCPATH
2048/X.25 NI
#163 X.25 PVC Address
Key Paths
NETXPORT.NIname.PROTOCOL.X.25.PVCPATH
128/X.25NI
#164 X.25 User Facility
Sets
NETXPORT.NI.NIname.POROTOCOL.X25.FACSET
128/X.25 NI
a. Maintenance Node command EXPANDDIR may be used to expand the directory
file. Refer to Using the Node Management Services (NMS) Utilities manual for
information regarding this command.
b. One NI must be used for loopback.
c. 2,550 reachable networks (255 pages and 10 reachable nets per page).