NS3000/iX Error Messages Reference Manual (36923-90043)

Chapter 19 435
FDDI Error Messages
19 FDDI Error Messages
The following error messages may appear when using or installing
FDDI on your system. The following list consists of error messages that
you may be able to resolve yourself. Other error messages may appear,
but require the help of your HP representative. If the message number
does not appear in this list, either write down the error if it is displayed
on your console, take a system dump, or run the diagnostics before
calling your HP representative for help.
1 MESSAGE: FDDI link ! aborted user’s request.
CAUSE: Your request has been aborted due to power fail recovery or the
driver was shutting down.
ACTION: This is a warning.
19 MESSAGE: FDDI link ! received frame with unknown 802.2 ctrl option.
CAUSE: Unknown.
ACTION: This is only a warning.
20 MESSAGE: FDDI link ! received frame with unknown 802.2 ctrl option.
CAUSE: Unknown.
ACTION: This is only a warning.
21 MESSAGE: FDDI link ! trace manager overrun.
CAUSE: The driver is generating trace entries faster than the trace
manager can process them. This causes some trace entries to be lost.
ACTION: This is only a warning and is indicative of a very busy system.
If debugging is a problem use partial tracing if possible (when full data
frames are not needed) to ensure trace data is not lost.
31 MESSAGE: FDDI link ! aborted user’s request.
CAUSE: Your request has been aborted due to the power fail recovery or
the driver was shutting down.
ACTION: This is a warning.
60 MESSAGE: FDDI link ! hardware reported that the ring went down.
CAUSE: Unknown.
ACTION: This is a warning. If the ring does not come up shortly, then
check network components (adapters, cables, etc.). Have your network
provider examine the network.