NetBase for MPE Reference Guide

Chapter 9
9-8
Program Input
The following table provides descriptions of the NBRPT01 reduction options.
Reduction Option Description
Enter Option
The number corresponding to the desired reduction option. 1 reads
through statistic log files to compile the data. 2 uses a reduction file
created from a previous run of NBRPT01 or NBRPT02.
Enter first Stat log #
The number of the first log file to be extracted. Applies only when
option 1 is selected.
Enter last Stat log #
The number of the last log file to be extracted. Applies only when
option 1 is selected.
Enter file name to save
reduction
If other reports are to be run against the same data, the reduction
can be reused. If a file name is entered here, the reduction data will
be saved under this file name. Applies only when option 1 is
selected.
Enter the file name of the
reduction to use
The name of a reduction file created by a previous run of NBRPT01
or NBRPT02. Applies only when option 2 is selected.
The following table provides descriptions of the NBRPT01 report options.
Report Option Description
Enter Option
Entering 1 (File access by program) causes the primary sort key to
be program name and all files accessed by that program to be listed
there under.
Entering 2 (Program access by file) causes the primary sort key to
be file name and all programs accessing each file to be listed
thereunder.
Print User Information
Entering N summarizes down to the program or file level. Entering
a Y summarizes down to the LDEV, user, program or file level.