MPE/iX Error Messages Manual Vol 3 (32650-90880)

192 Chapter4
Error Messages Viii C 3
System Disk Load
CAUSE Error returned from RENDEZVOUSIO for read labels.
Second read from the tape. Possible tape read error or tape
position error.
ACTION Determine cause of error from RENDEZVOUSIO and
correct. Clean tape drive and retry. Clean tape drive,
remake tape and retry.
322 MESSAGE An error was received from SENDIO reading the
second label from the tape.
CAUSE Error returned from SENDIO for read labels. Second read
from the tape.
ACTION Determine cause of error from SENDIO and correct.
323 MESSAGE An error occurred on the second read; not
enough data read.
CAUSE Tape read expected 256 bytes and got less than 200 bytes.
Possible tape read error or tape position error. Second read
from the tape. Reading labels.
ACTION Clean tape drive and retry. Clean tape drive, remake tape
and retry.
324 MESSAGE An error was received from RENDEZVOUSIO
reading the LIF directory from the tape.
CAUSE Error returned from RENDEZVOUSIO for read labels.
Third read from the tape. Possible tape read error or tape
position error.
ACTION Determine cause of error from RENDEZVOUSIO and
correct. Clean tape drive and retry. Clean tape drive,
remake tape and retry.
325 MESSAGE An error was received from SENDIO reading the
LIF directory from the tape.
CAUSE Error returned from SENDIO for read labels. Third read
from the tape.
ACTION Determine cause of error from SENDIO and correct.
326 MESSAGE An error occurred reading the LIF directory
from the tape; not enough data.
CAUSE Tape read expected 256 bytes and got less than 200 bytes.
Possible tape read error or tape position error. Third read
from the tape. Reading labels.
ACTION Clean tape drive and retry. Clean tape drive, remake tape
and retry.
327 MESSAGE This is not an MPE/iX boot tape; LIF label
bad.
CAUSE LIF label check failed. Not a valid boot tape.