MPE/iX Error Messages Manual Vol 3 (32650-90880)

188 Chapter4
Error Messages Viii C 3
System Disk Load
CAUSE Tape read expected 256 bytes and got less than 200 bytes.
Possible tape read error or tape position error.
ACTION Clean tape drive and retry. Clean tape drive, remake tape
and retry.
291 MESSAGE A failure was received from RENDEZVOUSIO
skipping backwards on tape.
CAUSE Error returned from RENDEZVOUSIO for skip record
back.
ACTION Determine cause of error from RENDEZVOUSIO and
correct.
292 MESSAGE A failure was received from SENDIO skipping
backwards on tape.
CAUSE Error returned from SENDIO for skip record back.
ACTION Determine cause of error from SENDIO and correct.
293 MESSAGE A second NL.PUB.SYS was found on the boot
tape.
CAUSE A second NL.PUB.SYS file was found on the tape. Invalid
tape format. File is identified by start number in tape file
header.
ACTION Determine the cause of the extra NL.PUB.SYS file and
correct. Remake the tape and redo the UPDATE or
INSTALL.
294 MESSAGE Can not purge NL.PUB.SYS from disk.
CAUSE Error returned from HPOPEN for create of NL.PUB.SYS.
File is identified by start number in tape file header.
ACTION Determine cause of error from HPOPEN and correct.
296 MESSAGE A failure occurred from RENDEZVOUSIO reading
user label block.
CAUSE Error returned from RENDEZVOUSIO for read user label
block of a system file.
ACTION Determine cause of error from RENDEZVOUSIO and
correct. Clean tape drive and retry. Clean tape drive,
remake tape and retry.
297 MESSAGE Length error reading user label block.
CAUSE EOF read from tape while reading user label data. Invalid
tape. Possible tape read error or tape position error.
ACTION Determine cause of error and correct. Clean tape drive and
retry. Clean tape drive, remake tape and retry.
298 MESSAGE A failure occurred from SENDIO reading user
label block.