MPE/iX Error Messages Manual Vol 3 (32650-90880)

Chapter 3 133
Error Messages Viii C 3
Private Volumes
1051 MESSAGE The type of semaphore specified for this
semaphore record initialization is not within
the valid range.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1060 MESSAGE The procedure attempted to AWAKEN a process
from waiting on its standard signal port (via
IPC_WAIT_PROCESS), but the process was not
currently waiting on its standard signal
port; the AWAKE was sent anyway.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
1061 MESSAGE The procedure attempted to AWAKEN a process
from blocking on its standard signal port,
but the process was not waiting on the
event(s) specified; process was blocked for a
different event on the signal port; AWAKE was
sent anyway.
CAUSE Same as message content.
ACTION Take a system dump and call your Hewlett-Packard
Representative.
Private Volumes
(PVERR)
20 MESSAGE PRIVATE VOLUMES FACILITY NOT INVOKED (PVERR
20)
21 MESSAGE OPERATOR REJECTED MOUNT REQUEST (PVERR 21)
22 MESSAGE INSUFFICIENT DRIVES AVAILABLE TO MOUNT VOLUME
SET (PVERR 22)
23 MESSAGE VOLUME SET TEMPORARILY IN USE BY SYSTEM
(PVERR 23)
24 MESSAGE GROUP IN VOLUME SET SPECIFICATION DOES NOT
EXIST (PVERR 24)
25 MESSAGE ACCOUNT IN VOLUME SET SPECIFICATION DOES NOT
EXIST (PVERR 25)