MPE/iX Error Messages Manual Vol 2 (32650-90902)

452 Chapter11
Store/Restore (Native Mode) and TurboSTORE/iX II
(S/R) cont.
CAUSE NOLOCK and SPLITVS options are not allowed on the
same command line.
ACTION Delete either NOLOCK or SPLITVS option and retype the
command.
797 MESSAGE WARNING: 'RENAME' OPTION HAS BEEN REDUNDANTLY
SPECIFIED. (S/R 797)
CAUSE The RENAME option was entered more than once.
ACTION Information only.
798 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH
'TRANSPORT' TO MPEv. (S/R 798)
CAUSE Specification of RENAME;TRANSPORT; as options to
STORE.
ACTION Do not use TRANSPORT with RENAME or vice versa.
RENAME is only supported on MPE/iX.
799 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH THE
'SPLITVS' OPTION. (S/R 799)
CAUSE Specification of RENAME;SPLITVS as options to STORE.
ACTION Do not use them together. RENAME is not supported for
SPLITVS.
800 MESSAGE 'RENAME' OPTION CANNOT BE USED WITH THE
'PURGE' OPTION. (S/R 800)
CAUSE RENAME and PURGE options are not allowed on the
same command line.
ACTION Delete either RENAME or PURGE option and retype the
command.
801 MESSAGE SPECIFIED FUNCTION (OPTION) IS NOT
IMPLEMENTED ON THIS RELEASE. (S/R 801)
CAUSE Same as message content.
ACTION Check the syntax and retype the command.
802 MESSAGE MAXIMUM ALLOWABLE NUMBER OF DEVICE FILE
EQUATIONS HAS BEEN EXCEEDED. (S/R 802)
CAUSE You specified too many device file equations.
ACTION Check the syntax and retype the command.
803 MESSAGE DEVICE FILE EQUATION NAME EXCEEDS THE MAXIMUM
ALLOWED LENGTH. (S/R 803)
CAUSE Same as the message content.
ACTION Check the syntax and retype the command.
804 MESSAGE EXPECTED ONE OF: SHOW, ONERROR, LOCAL, GROUP,