MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 9 381
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
0041 MESSAGE **error** fail to mark end of tape
0051 MESSAGE pme = !
0052 MESSAGE label
0100 MESSAGE Please mount another tape for SYSGEN. This
will be reel # !
0101 MESSAGE Is SYSGEN's tape (reel !) ready (y/n)?
0105 MESSAGE Do you really want to abort the TAPE
generation (y/n)?
0200 MESSAGE ! non-user files will be written to tape
0201 MESSAGE dumping ! to tape
0500 MESSAGE **warning** No network configuration dumped!
!
CAUSE A valid network configuration does not exist at the time
SYSGEN generates the boot tape.
ACTION Usually none. If you require a remote configuration file,
abort the tape and add a remote configuration file to the
local configuration through the SYSFILE configurator
RDCC command.
0501 MESSAGE **warning** ! will be ! on the tape.
CAUSE The file name is changed to a new file name on the boot
tape; for example, the remote configuration file becomes
NMCONFIG.PUB.SYS.
ACTION None.
0502 MESSAGE **warning** illegal file type. File ! dumped
as system file
CAUSE A file type created in the SYSFILE configurator is
corrupted. The file is dumped as a system program type.
ACTION Either allow the system to use the default configuration
file(s) or reconfigure the file through the SYSFILE
configurator and generate a new tape.
0503 MESSAGE **warning** File ! is empty.
1000 MESSAGE **error** couldn't find file !
1001 MESSAGE **error** Error in counting number of diag
files
1002 MESSAGE **error** ! is not a bootable image
CAUSE Through the SYSFILE configurator, you have declared a
file to be a bootable image. It is not.
ACTION After tape generation, check your file for errors. Correct it
and add it to the system through the SYSFILE SBOOT