MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 8 305
System Startup, Shutdown, and Configuration
Class Errors
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
95 MESSAGE No message. System halts. (E)
CAUSE Microcode detects possible failure of RAM5 U1401.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
96 MESSAGE No message. System halts. (E)
CAUSE Microcode detects possible failure of RAM1 U1402.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
97 MESSAGE No message. System halts. (E)
CAUSE Microcode detects possible failure of RAM4 U1403.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
98 MESSAGE No message. System halts. (E)
CAUSE Microcode detects possible failure of RAM0 U1404.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
C0 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM0 U1404.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
C1 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM1 U1402.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
C2 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM2 U1302.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
C3 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM3 U1303.
ACTION Contact your Hewlett-Packard Support Representative.
Remove the floating-point board, then reboot the system.
C4 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM4 U1403.