MPE/iX Error Messages Manual Vol 2 (32650-90902)

298 Chapter8
System Startup, Shutdown, and Configuration
Class Errors
26 MESSAGE No message. System halts. (E)
CAUSE Failure while verifying operation of cache FREZ.
ACTION Contact your Hewlett-Packard Support Representative.
C7 MESSAGE No message. System halts. (E)
CAUSE Macrocode detects possible failure of RAM7 U1301.
ACTION Remove Floating-Point board then reboot the system.
Contact your Hewlett-Packard Support Representative.
CA MESSAGE No message. System halts. (E)
CAUSE An error occurs during a series of arbitrary microcode
calculations. Areas of possible cause are the mapper
PROM or the math chips.
ACTION Remove floating-point board then reboot the system.
Contact your Hewlett-Packard Support Representative.
CC MESSAGE No message. System halts. (E)
CAUSE An error occurs which slows the execution of the
floating-point unit.
ACTION Remove floating-point board, then reboot the system.
Contact your Hewlett-Packard Support Representative.