MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 8 295
System Startup, Shutdown, and Configuration
Class Errors
ACTION Contact your Hewlett-Packard Support Representative.
01 MESSAGE No message. System halts. (E)
CAUSE Verification of the read/write protocol in the first and last
set of data cache RAM fails.
ACTION Contact your Hewlett-Packard Support Representative.
03 MESSAGE No message. System halts. (E)
CAUSE Verification of the read or write address test operation on
data cache fails. Second possible cause of the error is
memory. Third possible cause of the error is the TLB.
ACTION Contact your Hewlett-Packard Support Representative.
04 MESSAGE No message. System halts. (E)
CAUSE Verification of the read or write (data path test operation)
on the data cache fails. Second possible cause of the error
is memory.
ACTION Contact your Hewlett-Packard Support Representative.
05 MESSAGE No message. System halts. (E)
CAUSE Verification of the half word or byte operation on the data
cache fails. Second possible cause of the error is the
register file unit. Third possible cause of the error is
memory.
ACTION Contact your Hewlett-Packard Support Representative.
06 MESSAGE No message. System halts. (E)
CAUSE data cache cannot set enable interrupt request register
(EIRR) bits. Second possible cause of the error is the
register file unit.
ACTION Contact your Hewlett-Packard Support Representative.
07 MESSAGE No message. System halts. (E)
CAUSE Verification of the data cache dirty bit, miss or flush
operation fails. Second possible cause of the error is the
register file unit. Third possible cause of the error is
memory.
ACTION Contact your Hewlett-Packard Support Representative.
08 MESSAGE No message. System halts. (E)
CAUSE Verification of the data cache load word operation with
clean MISS fails. Second possible cause of the error is
memory.
ACTION Contact your Hewlett-Packard Support Representative.
0A MESSAGE No message. System halts. (E)