MPE/iX Error Messages Manual Vol 2 (32650-90902)
Chapter 7 243
Volume II Chapter 5
UPS
processing, the
UPS Monitor found that a shutdown operation
was already in progress. (UPSERR 0556)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
557 MESSAGE UPS Monitor logic error: During shutdown
processing, when attempting to start the
shutdown limit timer, the UPS Monitor found
that a shutdown limit timer was already
running. (UPSERR 0557)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
558 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from
procedure Release_Timer. (UPSERR 0558)
CAUSE This is a software-detected error condition that indicates
an error occurred in a call to the speciļ¬ed MPE/iX
Operating System procedure when that procedure was
called by the UPS Monitor software.
ACTION Call your Hewlett-Packard service representative.
559 MESSAGE UPS Monitor logic error: During UPS I/O
completion processing in the "Set Terminal
Controls" sequence, an I/O reply message was
received that was not of the expected
(Terminal Control) type. (UPSERR 0559)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
560 MESSAGE UPS Monitor logic error: While processing an
I/O Write completion, an I/O reply message
was received that was not of the expected
(Write) type. (UPSERR 0560)
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
561 MESSAGE UPS Monitor logic error: While processing an