MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 6 221
Volume II Chapter 5
Threshold Manager
CAUSE Exclusive access to the configuration data is required.
ACTION Wait until the program is available for exclusive access.
338 MESSAGE Threshold Manager must be enabled. (THMGRERR
338)
CAUSE This command requires Threshold Manager to be enabled.
ACTION Execute the command ENABLEMANAGER and try the
command again.
401 MESSAGE Incomplete command pending on end-of-file.
(THMGRERR 401)
CAUSE The program has encountered EOF on the redirected
output file.
ACTION Create a larger output file and execute command again.
402 MESSAGE Unable to process the command. (THMGRERR 402)
CAUSE An error occurred while attempting to process a command.
ACTION Enter the command again.
403 MESSAGE Invalid parameter length. (THMGRERR 403)
CAUSE The input parameter size exceeds the size allowed for this
parameter.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
404 MESSAGE Command history stack is empty. (THMGRERR
404)
CAUSE An attempt was made to use the REDO facility when no
other commands have executed.
ACTION Enter the command directly.
405 MESSAGE Command not found in command history stack.
(THMGRERR )
CAUSE The requested command was not found in the command
history stack.
ACTION Enter the command directly.
406 MESSAGE Invalid parameter length or composition.
(THMGRERR 406)
CAUSE An error was detected in the argument provided, either
the length is invalid or it is the wrong type.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
407 MESSAGE Unrecognized command. (THMGRERR 407)
CAUSE The command entered is not a valid command.