MPE/iX Error Messages Manual Vol 2 (32650-90902)

Chapter 6 219
Volume II Chapter 5
Threshold Manager
CAUSE The input parameter size exceeds the size allowed for this
parameter.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
303 MESSAGE Parameter composition is invalid. (THMGRERR
304)
CAUSE The input parameter is not correct.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
305 MESSAGE Parameter is invalid. (THMGRERR 305)
CAUSE The input parameter type is not correct. A numeric input
parameter can only be accepted for numeric arguments,
and a string parameter for string arguments.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
307 MESSAGE Info is invalid. (THMGRERR 307)
CAUSE The information passed to this program via the ";INFO="
parm in the RUN command is invalid.
309 MESSAGE Failed to open the message catalog. (THMGRERR
309)
CAUSE Unable to open, or possibly find the catalog associated
with this utility.
ACTION Restore the message catalog (TMCATnnn, where nnn is the
native language ID number of the machine) from backup
tapes and continue.
310 MESSAGE Invalid character. (THMGRERR 310)
CAUSE Invalid character detected in the command line.
ACTION Enter command again.
315 MESSAGE Parameter length overflow. (THMGRERR 315)
CAUSE The input parameter size exceeds the size allowed for this
parameter.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
321 MESSAGE Invalid REDO command. (THMGRERR 321)''
CAUSE Cannot find the command to redo, it is either invalid or
has been pushed off the top of the stack and is no longer
accessible.
ACTION Enter the command again.
324 MESSAGE Cannot recognize the command passed to HELP.