MPE/iX Error Messages Manual Vol 2 (32650-90879)

354 Chapter9
System Startup, Shutdown, and Configuration (cont)
"Nonclass" Errors
they are restricted to USER devices.
ACTION Assigned to USER devices or contact software personnel
who is responsible for maintaining these file for adivice.
1166 MESSAGE **error** mpe subtype only configurable for
USER devices
CAUSE These device subtypes are only associated with the 'classic'
16-bit HP 3000 systems and are honored only to support
those programs ported over from those systems.Therefore,
they are restricted to USER devices.
ACTION Assigned to USER devices or contact software personnel
who is responsible for maintaining these file for advice.
1167 MESSAGE **error** MODE=NLIO not configurable for this
device
CAUSE Setting MODE equal to NLIO is allowed only for printers
and terminals. You probably set it for a different device.
ACTION Check the configuration and specify an appropriate device.
1170 MESSAGE **error** Use the adev command to add devices
CAUSE You have attempted to add a device that has not been
defined through the parameters to this command.
ACTION Add the device prior to using this command.
1171 MESSAGE **error** Can't change this path to be a
device
CAUSE You have attempted to change a path designation to be a
device. SYSGEN does not accept the operation.
ACTION None.
1172 MESSAGE **error** Can't change ldevs to paths or
paths to ldevs
CAUSE You have attempted to interchange LDEVs and paths.
SYSGEN does not accept the operation.
ACTION Reenter the command with the proper parameters.
1173 MESSAGE **error** Use the mdev command to modify
devices
CAUSE You have attempted to change some of the device
configuration elements within this command. SYSGEN
does not accept the operation.
ACTION None.
1180 MESSAGE **error** OUTDEV invalid
CAUSE You have attempted to designate a device that is
incompatible with OUTDEV requirements. SYSGEN does