MPE/iX Error Messages Manual Vol 2 (32650-90879)

Chapter 7 249
Volume II Chapter 5
UPS
(UPSERR 0594
CAUSE This is a software-detected error condition that indicates
an error in the UPS Monitor software or in some other
system software, or a system memory error.
ACTION Call your Hewlett-Packard service representative.
595 MESSAGE UPS Monitor information: UPS Monitor process
has been launched by PROGEN and is
starting-up its operation. (UPSWRN 0595)
CAUSE The system has just been started-up, and the UPS Monitor
software subsystem has automatically been started as
well.
ACTION No action is needed. This is merely an informational
message confirming that the UPS Monitor software has
been started.
596 MESSAGE UPS Monitor information: UPS Monitor process
has initialized itself successfully, and is
ready to start UPS monitoring operations.
(UPSWRN 0596)
CAUSE After the UPS Monitor process was first started, it
successfully initialized itself: it acquired the basic
resources it needed to commence operations.
ACTION No action is needed. This is merely an informational
message that confirms that the UPS Monitor completed its
process initialization successfully.
597 MESSAGE UPS Monitor information: UPS Monitor process
is shutting down, due to a normal system
shutdown. (UPSWRN 0597)
CAUSE The system operator initiated a normal Control-A
Shutdown of the MPE/iX system. The UPS Monitor is
shutting itself down as part of the overall system
shutdown.
ACTION No action is needed. This is merely an informational
message that confirms that the UPS Monitor is shutting
down due to a normal system shutdown.
598 MESSAGE UPS Monitor system call error: Error status !
(Subsystem # !, Error # !) received from
procedure Get_Ups_Devices_List. (UPSERR 0598)
CAUSE This is a software-detected error condition that indicates
an error occurred in a call to the specified MPE/iX
Operating System procedure when that procedure was
called by the UPS Monitor software.
ACTION Call your Hewlett-Packard service representative.