MPE/iX Error Messages Manual Vol 2 (32650-90879)

220 Chapter6
Volume II Chapter 5
Threshold Manager
ACTION Use the HELP summary to identify which command it
should be, and enter the command again. The HELP
summary is accessed by issuing the command HELP
without any arguments.
409 MESSAGE This command has no associated functionality.
(THMGRERR 409)
CAUSE An invalid command was entered.
ACTION None.
410 MESSAGE Error in accessing the message catalog.
(THMGRERR 410)
CAUSE An error occurred accessing the message catalog for a
particular message.
ACTION Restore the message catalog (TMCATnnn, where nnn is the
native language ID number of the machine) from backup
tapes and continue.
411 MESSAGE Invalid numeric index into command history
stack. (THMGRERR 411)
CAUSE The numeric argument provided with the REDO command
points to an entry that does not exist or that has been
pushed off the top of the stack.
ACTION Enter the command directly.
412 MESSAGE Command name length exceeds 16 characters.
(THMGRERR 412)
CAUSE A command was entered which exceeded the allowable
length for a command.
ACTION Enter the command again and insert spaces between the
comand and the arguments.
413 MESSAGE Insufficient capabilities to execute this
command. (THMGRERR 413)
CAUSE The user does not have the required privilege level to
execute this command.
ACTION Obtain the privilege level required to execute this
command and try again.
414 MESSAGE A required parameter was not specified in
command. (THMGRERR 414)
CAUSE A required parameter is missing from the command input.
ACTION Use the HELP facility for this command or use the manual
and enter the command again.
415 MESSAGE This parameter can consist of numeric
characters only. (THMGRERR 415)