MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 2 97
Command Interpreter
(CIERR)
CAUSE A break was entered during the store process.
ACTION None. Information only.
1022 MESSAGE UNEXPECTED SPECIAL CHARACTER IN FILESET.
(CIERR 1022)
CAUSE Syntax error.
ACTION Check the syntax and reenter the command.
1025 MESSAGE ERROR WHEN USING SCRATCH FILE - RESTORE
STOPPED. (CIERR 1025)
CAUSE An error occurred when using the scratch file during
restore.
ACTION Reenter the command using a different scratch file.
1026 MESSAGE ERROR ACCESSING TAPE - RESTORE STOPPED.
(CIERR 1026)
CAUSE An error occurred accessing the tape during a restore
operation.
ACTION Clean tape drive and try again.
1027 MESSAGE UNABLE TO REPORT RESULTS - LIST FILE ERROR.
(CIERR 1027)
CAUSE An error was encountered on the specified list file.
ACTION Correct the list file specification, and reenter the
command.
1028 MESSAGE DISK I/O ERROR - RESTORE STOPPED. (CIERR
1028)
CAUSE There is a problem with the disk drive.
ACTION Contact your Hewlett-Packard representative.
1029 MESSAGE UNIDENTIFIED DIRECTORY ERROR - RESTORE
STOPPED. (CIERR 1029)
CAUSE Same as the message.
ACTION Verify the RESTORE device class and number. Then
reissue the command.
1030 MESSAGE CANNOT RESTORE TO VIRTUAL DEVICE. (CIERR
1030)
CAUSE Same as the message.
ACTION Contact your system manager for the correct device class
name.
1031 MESSAGE INVALID DEVICE CLASS NAME. (CIERR 1031)
1032 MESSAGE DEVICE CLASS NOT PRESENT ON SYSTEM. (CIERR
1032)