MPE/iX Error Messages Manual Vol 1 (32650-90878)

74 Chapter2
Command Interpreter
(CIERR)
this command. Your logon does not have this capability.
ACTION If you need this information log on with a user name that
has AM capability and re-enter the command. If you are
not assigned a user name with AM capability, consult with
your account manager.
729 MESSAGE EXECUTING THIS COMMAND ON ANY GROUP OTHER
THAN THE LOGON GROUP REQUIRES AM CAPABILITY.
(CIERR 729)
CAUSE Account Manager (AM) capability is required to execute
this command; evidently your logon does not have this
capability.
ACTION If you need this information log on with a user name that
has AM capability and re-enter the command. If you are
not assigned a user name with AM capability, consult with
your account manager.
730 MESSAGE ALTACCT CAN HANDLE A MAXIMUM OF 71
PARAMETERS. (CIERR 730)
CAUSE You have specified too many parameters on the command
line.
ACTION Consult the MPE/iX Commands Reference Manual for
acceptable parameters.
731 MESSAGE ALTGROUP CAN HANDLE A MAXIMUM OF 71
PARAMETERS. (CIERR 731)
CAUSE You have specified too many parameters on the command
line.
ACTION Consult the MPE/iX Commands Reference Manual for
acceptable parameters.
732 MESSAGE ALTUSER CAN HANDLE A MAXIMUM OF 71
PARAMETERS. (CIERR 732)
CAUSE You have specified too many parameters on the command
line.
ACTION Consult the MPE/iX Commands Reference Manual for
acceptable parameters.
733 MESSAGE NEWACCT CAN HANDLE A MAXIMUM OF 71
PARAMETERS. (CIERR 733)
CAUSE You have specified too many parameters on the command
line.
ACTION Consult the MPE/iX Commands Reference Manual for
acceptable parameters.
734 MESSAGE NEWGROUP CAN HANDLE A MAXIMUM OF 71
PARAMETERS. (CIERR 734)