MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 5 389
Error Messages V i C 5
(Subsystem 196)
254 MESSAGE PROBE failure on the altseq parameter of the
HPMERGEINIT intrinsic.
CAUSE The address specified in the
altseq parameter is not
within the allowable address range.
ACTION Check the value of the
altseq parameter.
255 MESSAGE PROBE failure on the statistics parameter of
the
HPMERGEINIT intrinsic.
CAUSE The address specified in the
statistics parameter is not
within the allowable address range.
ACTION Check the value of the
statistics parameter.
256 MESSAGE PROBE failure on the charseq parameter of the
HPMERGEINIT intrinsic.
CAUSE The address specified in the
charseq parameter is not
within the allowable address range.
ACTION Check the value of the
charseq parameter.
260 MESSAGE PROBE failure on the status parameter of the
HPMERGEOUTPUT intrinsic.
CAUSE The address specified in the
status parameter is not
within the allowable address range.
ACTION Check the value of the
status parameter.
261 MESSAGE PROBE failure on the buffer parameter of the
HPMERGEOUTPUT intrinsic.
CAUSE The address specified in the
buffer parameter is not
within the allowable address range.
ACTION Check the value of the
buffer parameter.
262 MESSAGE PROBE failure on the length parameter of the
HPMERGEOUTPUT intrinsic.
CAUSE The address specified in the
length parameter is not
within the allowable address range.
ACTION Check the value of the
length parameter.
263 MESSAGE PROBE failure on the status parameter of the
HPMERGEEND intrinsic.
CAUSE The address specified in the
status parameter is not
within the allowable address range.
ACTION Check the value of the
status parameter.
264 MESSAGE PROBE failure on the statistics parameter of
the
HPMERGEEND intrinsic.