MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 273
Command Interpreter
(CIERR) 1901-12256
CAUSE The file name entered with the COPY command is
reserved for system use.
ACTION Do not specify system-defined files ($ prefix) with the
COPY command.
9121 MESSAGE A FILE WHOSE FILE CODE IS ! CANNOT BE COPIED.
(CIERR 9121)
CAUSE Evidently, you have specified a file that is of a special type
and cannot be copied.
ACTION Use FCOPY to copy the file. If it also fails, consult with the
online Help facility or the MPE/iX Commands Reference
Manual, for information on copying files of this type.
9122 MESSAGE BREAK DETECTED DURING COPY, NO COPY WAS DONE.
(CIERR 9122)
CAUSE You pressed the break key while the file was being copied.
ACTION No action is required, unless you did not mean to stop the
copying.
9123 MESSAGE KSAM FILES CANNOT BE COPIED VIA THE COPY
COMMAND. (CIERR 9123)
CAUSE Due to the structure of KSAM files copy command cannot
be used to duplicate them.
ACTION You can use FCOPY to accomplish this task. Refer to the
online Help facility or the FCOPY Reference Manual.
9125 MESSAGE COPY COMMAND CANNOT WRITE TO TARGET FILE.
(CIERR 9125)
CAUSE A file system error occurred while attempting to write to
the "TO =" file.
ACTION Contact your System Administer.
9126 MESSAGE COPY COMMAND CANNOT READ SOURCE FILE. (CIERR
9126)
CAUSE The account security prevented the copy command from
reading the source file you specified.
ACTION Ask the owner of the file to release the file so you can copy
it. Consult with your account manager or system manager
if you do not know who owns the file.
9127 MESSAGE COPY COMMAND CANNOT CLOSE SOURCE FILE. (CIERR
9127)
CAUSE Unexpected file system error.
ACTION Submit an SR.
9128 MESSAGE COPY COMMAND CANNOT CLOSE TARGET FILE. (CIERR
9128)