MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 263
Command Interpreter
(CIERR) 1901-12256
ACTION Reenter the command and make sure the message level
specified is 0, 1, or 2.
9008 MESSAGE INVALID WAIT VALUE - EXPECTED A NUMBER IN THE
RANGE OF 0 THROUGH 32767. NO WAIT IMPOSED.
(CIWARN 9008)
CAUSE You supplied a wait value for the :INPUT command that is
not within the specified range.
ACTION Reenter the command and specify a wait value that is
within the range.
9009 MESSAGE THE REDO STACK CANNOT BE CREATED, REDO IS
DISABLED. (CIWARN 9009)
CAUSE Insufficient heap stack to create the redo stack.
ACTION Check to see if your application is consuming lots of heap
space.
9010 MESSAGE PSEUDO END OF FILE FOR UDCS AND COMMAND
FILES. (CIERR 9010)
9011 MESSAGE ! SUBSYSTEM INTERNAL ERROR: ! PLEASE CONTACT
H.P. (CIERR 9011)
CAUSE Internal error occurred due to a :RESTDUMP or
:SETDUMP command.
ACTION Contact your system manager or support representative.
9012 MESSAGE THE TIMED TERMINAL READ HAS EXPIRED. (CIERR
9012)
CAUSE The input interval as set in the HPCITIMEOUT variable
expired.
ACTION No action is required. You may want to set HPTIMEOUT
to 0 (meaning no timeout), or to a larger number.
9013 MESSAGE THE CI ENVIRONMENT CANNOT BE CREATED. (CIERR
9013)
CAUSE Internal error.
ACTION Reenter the command. If it fails consistently, contact your
system manager or support representative.
9014 MESSAGE PREVIOUS REDO STACK SPACE CANNOT BE RELEASED.
(CIWARN 9014)
CAUSE Same as message content.
ACTION No action is required.
9015 MESSAGE PROGRAMMATIC CCB CANNOT BE CREATED. (CIERR
9015)
CAUSE Internal error.