MPE/iX Error Messages Manual Vol 1 (32650-90878)

Chapter 3 243
Command Interpreter
(CIERR) 1901-12256
reenter the command and make sure the device specified
is available for use.
7004 MESSAGE SPECIFIED DEVICE MUST BE JOB ACCEPTING.
(CIERR 7004)
7005 MESSAGE SPECIFIED DEVICE IS IN DIAGNOSTIC MODE.
(CIERR 7005)
CAUSE A diagnostic utility is running on the specified device.
ACTION Reenter the command and make sure the device specified
is not in the diagnostic mode.
7006 MESSAGE SPECIFIED DEVICE IS UNAVAILABLE TO SYSTEM.
(CIERR 7006)
CAUSE The specified device is not available to the system.
ACTION Ask the operator to "UP" the device.
7007 MESSAGE SPECIFIED DEVICE HAS A DOWN PENDING ON IT.
(CIERR 7007)
CAUSE The DOWN command has been issued against this device
and will take effect as soon as the current work performed
on the device is completed.
ACTION Reenter the command and use another device if possible.
If not, consult with your system operator or system
manager.
7008 MESSAGE SPECIFIED DEVICE MUST NOT BE A DS DEVICE.
(CIERR 7008)
CAUSE The device specified is a distributed system (DS) device.
ACTION Reenter the command and make sure the specified device
is not a DS device.
7009 MESSAGE MUST HAVE PS CAPABILITY TO EXECUTE THIS
COMMAND. (CIERR 7009)
CAUSE A command was entered that requires programmatic
sessions (PS) capability.
7010 MESSAGE MUST HAVE SEMI-COLON (;) DELIMITER. (CIERR
7010)
CAUSE A semi-colon (;) delimiter was ommitted in the command
entry.
ACTION Reenter the command and make sure that the semi-colon
delimiter is used.
7011 MESSAGE EXPECTED VALID INTEGER NUMBER OF LDEV. (CIERR
7011)
CAUSE The interger number entered for the logical device was not
a valid number.