MPE/iX Error Messages Manual Vol 1 (32650-90878)

206 Chapter3
Command Interpreter
(CIERR) 1901-12256
3823 MESSAGE ENHANCE= PARAMETER OVERRIDES PREVIOUS
ENHANCE=PARAMETER. (CIWARN 3823)
CAUSE Previous ENHANCE= parameter has been overwritten with
current parameter.
ACTION No action needed unless overwrite was in error.
3824 MESSAGE EXPECTED EQUAL SIGN TO DELIMIT PARAMETER.
(CIERR 3824)
CAUSE Error detected in parameter delimiter.
ACTION Check syntax.
3825 MESSAGE EXPECTED VALUE BETWEEN 0 AND 3 INCLUSIVE.
(CIERR 3825)
CAUSE You entered a value less than 0 or greater than 3.
ACTION Check syntax and reenter the command, using a value
between 0 and 3, inclusive.
3826 MESSAGE FORMAT= PARAMETER OVERRIDES PREVIOUS FORMAT=
PARAMETER. (CIWARN 3826)
CAUSE Previous FORMAT= parameter overwritten by current
parameter.
ACTION No action needed unless parameter overwrite was in error.
3827 MESSAGE EXPECTED VALUE BETWEEN 1 AND 4 INCLUSIVE.
(CIERR 3827)
CAUSE You entered a value less than 1 or greater than 4.
ACTION Check syntax and reenter the command using a value
between 1 and 4, inclusive.
3828 MESSAGE PRIORITY= PARAMETER OVERRIDES PREVIOUS
PRIORITY= PARAMETER. (CIWARN 3828)
CAUSE Previous PRIORITY= parameter overwritten by current
parameter.
ACTION No action necessary unless overwrite of parameter was in
error.
3829 MESSAGE EXPECTED VALUE BETWEEN 1 AND 13 INCLUSIVE.
(CIERR 3829)
CAUSE You entered a value that was less than 1 or greater than
13.
ACTION Check syntax and reenter the command using a value
between 1 and 13, inclusive.
3830 MESSAGE TRACE REQUIRES AT LEAST ONE PARM,"ON" OR
"OFF". (CIERR 3830)
CAUSE You did not enter an acceptable value for the TRACE